Rugged CAN/CANopen Output Module for Switching Relays, Solenoids and Lamps.

• Excellent pricing.
• Easy to use module adds DC outputs to any devices with CANbus networking.
• PLC and industrial controller compatible.
• 10 channel DC sinking (NPN) I/O module with fast 24VDC/2A fault tolerant, over current protected solid state outputs.
• Designed to switch relays, solenoids, lamps and other devices.
• Fast I/O and CANopen message response - less then 50 microseconds.
• Wide power supply range.
• Rugged, heavy aluminum base designed for screw mounting directly inside terminal enclosures, junction boxes, valve panels on machinery, mobile, and building automation installations.
• Large, high quality spring-cage terminal blocks resist vibration and insure that wires are connected during system installation, and also eliminates the need for expensive double ended cord sets used with block I/O modules.
• 1 common and 1 power terminal available to connect directly to each relay or solenoid.
• Isolated outputs with large individual LED lamps near terminals makes this module exceptional for wiring and commissioning your control application.
• CAN/CANopen (DS301/DS401) communication to 1MHz.
• Designed and tested to expand PLC and embedded I/O controllers.
• Self contained module measures only 5.5 x 2.5 x .875 inches (140 x 65 x 22 mm).
• Versions with easily accessible DIP switch for setting node ID and baud rates, or DIP switch free version with network settings in CANopen dictionary.
• Easily viewable LED's for monitoring network and module status.
• Eliminates flimsy plastic DIN rail I/O modules - drill and tap two holes in your panel or on your machine and the 905 series I/O module sits firmly and resists vibration.
• Eliminates the need for "network modules" like other I/O's. The 905 series I/O module contains all networking and control- just add 24VDC, a CAN cable, and the module is communicating on the CAN network.
• CANopen features include: life guarding, node guarding, heartbeat producer/consumer, change of state, SYNC triggered outputs, 2 receive PDO and 1 transmit PDO, static PDO mapping.
• Pulse mode outputs provides an accurate pulsed output which is suited for "plugging" (reverse driving) opposing hydraulic valves to improve switching times in fast machinery.
• All CANopen settings can be stored in flash.

Rugged CAN/CANopen 16 channel Fast DC Input Module

• Excellent pricing.
• PLC compatible and tested.
• 16 channel 24VDC sourcing (switch input to 0V to trigger) I/O module with isolated inputs.
• Fast inputs: < 0.1ms input capture.
• Rugged, heavy aluminum base designed for screw mounting directly inside terminal enclosures, junction boxes, valve panels on machinery, mobile, and building automation installations.
• Large spring-cage terminal blocks resist vibration and insure wire connections during control system installation.
• Each input has an LED lamp near its terminals making this unit simple to monitor the status of each input.
• CAN/CANopen (DS301/DS401) communication to 1MHz.
• Designed and tested to expand PLC and embedded I/O controllers.
• Self contained module measures only 5.5 x 2.5 x .875 inches (140 x 65 x 22 mm).
• Versions with easily accessible DIP switch for setting node ID and baud rates, or DIP switch free version with network settings in CANopen dictionary.
• CANopen features include: life guarding, node guarding, heartbeat producer/consumer, change of state, event timer, inhibit timer, SYNC triggered inputs, 1 transmit PDO, static PDO mapping, remote requests.
• Change of state messages include any change, rising, and falling signals that can be set individually for each input.
• All CANopen settings can be stored in flash.